2.Periodic Maintenance
AK 550
2-22
NOTICE
◆
It is recommended to use KYMCO original 4-stroke engine oil.
◆
The following conditions may expedite oil deterioration, an early oil
change is advised.
Riding on pebbled roads often.
Riding short distances often.
Idling often.
Riding in the cold area.
◆
When replenishing oil, make sure the oil level is not exceeding the Upper
Limit mark.
◆
Do not mix-use oils of different brand, class or low quality ones; they
may cause engine faults.
◆
Change oil while the engine is still hot; be careful not to burn your skin.
Oil Filter Cartridge Tightening Torque:
11 Nm (110 kgf•cm)
Engine Oil Drain Cock Tightening Torque:
9 Nm (90 kgf•cm)
Magnet Screw Tightening Torque:
28 Nm (280 kgf•cm)
Precautions on Oil Change
◆
Excessive and insufficient oil amount can both affect engine performance.
Excessive Oil
-
Increased friction resistance of moving parts in the engine, which
lowers output power and increases engine temperature, leading to early
deterioration of engine oil.
Insufficient Oil
-
Reduced oil supply to moving parts in the engine, therefore
results in worn parts, parts ablation, etc.
◆
Do not mix-use oils of different brand, class or low quality ones; they may
cause engine faults.
◆
Kymco Emissary Engine Oil contains additives (e.g., spirits, etc.) during the
manufacturing process.
◆
Arbitrarily mixing additives bought from the market may deteriorate the oil,
affect lubricating properties and shorten the service life of engine.
Summary of Contents for AK 550
