KYMCO AK 550, Service Manual

Page: 66 / 461

2.Periodic Maintenance AK 550
2-35
Learn Code Activation Procedure:
1. Press and hold Operation Button (
︿
button on the Handlebar), but it is
necessary to switch over to Dashboard position “m” in advance.
2. KEY ON the KEYLESS Main Switch.
3. Release the Operation Button (
︿
) when the front tire of the Model Symbol
flashes and tire pressure unit disappears.
4. TPMS is now entered into Code Learning Mode.
5. The Front Tire in the Symbol flashes continuously.
6. Operator releases or inflates the Front Tire to get a pressure change > 3psi,
the sensor will be awakened within 1 minute; setting of the front wheel is
complete when the pressure value appears.(If a Code Learn is not performed
when the Front Tire flashes, press the UP button to jump to Rear Tire Code
Learn. If a Code Learn is not accomplished within 2 minutes, the program
exits Code Learn Mode.)
7. Now that the Rear Tire of the Model Symbol flashes continuously.
8. Operator releases or inflates the Rear Tire to get a pressure change > 3psi,
the sensor will be awakened within 1 minute; setting of the rear wheel is
complete when the pressure value appears.(If a Code Learn is not performed
when the Rear Tire flashes, press the UP button to exit Code Learn Mode. If a
Code Learn is not accomplished within 2 minutes, the program exits Code
Learn Mode.)
9. Now that Front Tire flashes, tire pressure value appears with unit displayed.