KYMCO AHG5, Service Manual

Page: 53 / 363

3. PERIODIC MAINTENANCE
DT X360
3-20
Rear brake
Check the cutout in each pad.
If either pad is worn to the cutout, replace
both pads as a set. See your KYMCO dealer
for this service.
16.3. Brake levers
1. Adjust brake lever clearance using
adjustment knob (totally 4 adjustment
positions).
2. Push the brake lever forward and then
turn the adjuster knob to align the number
with the round punch mark on the lever
3. After adjustment, release the Brake Lever
and check if the lever position is suitable
for driver

The distance from the grip to the
released lever is at its closest at
number 1 an d the furthest away at
number 4.
17. Nuts/Bolts/Fasteners
Check all important chassis nuts and bolts
for looseness.
Tighten them to their specified torque values
if any looseness is found