KYMCO AHG5, Service Manual

Page: 228 / 363

12. COOLING SYSTEM
DT X360
12-7
Remove the screw (3) and reserve tank lid
(4).
Open the coolant reserve tank lid. Siphon
the coolant out of the reserve tank with an
appropriate suction device. If a suction
device is unavailable remove the reserve
tank and poor it out.
When the coolant has fished draining return
the drain bolt to the water pump with a new
sealing washer.
Fill the reserve tank to the upper level line.
Fill the system with the recommended
coolant through the filler opening up to the
filler neck.
Gently rock the vehicle side-to-side to
release any air bubbles trapped in the
cooling system.
4.3. Air Bleeding
Bleed air from the system as follow:
1. Start the engine and let it idle for 2

3
minutes.
2. Snap the throttle three to four times to
bleed air from the system.
3. Stop the engine and add coolant to the
proper level if necessary. Reinstall the
radiator cap.
4. Check the level of coolant in the reserve
tank and fill to the upper level if it is low.
(3) (4)
Full
Low