This document is the property of KYMATI GmbH and must not be copied or disclosed without its written authorisation.
- KYMATI GmbH – 2021
KY.MAN.0105 (6.0)
KY-LOC 1D.02.01 User Manual
Doc.- No.: KY.MAN.0105
Version:
6.0
Date:
14.12.2021
Page:
54 of 83
Figure 39: Sensor Wizard ‘Switching Device’ settings – example values
PLC Settings
The user can specify the settings for the PLC communication. For the master and the
slave device an IP, port and cycle time can be specified. Typical values for the cycle
time are down to 100 ms. There should be no value smaller than 50 ms. Every ‘cycle
time’ period, KY-LOC.1D sends one 64byte UDP data frame to ‘ip:port’ from ‘source
port 2000’. IP address of ‘0.0.0.0’ means that output is deactivated.
PLC/customer protocol facts at a glance:
UDP
64 bytes frame length
Data fields are 'network byte order’
For details, please refer to the ‘interface control document’
