This document is the property of KYMATI GmbH and must not be copied or disclosed without its written authorisation.
- KYMATI GmbH – 2021
KY.MAN.0105 (6.0)
KY-LOC 1D.02.01 User Manual
Doc.- No.: KY.MAN.0105
Version:
6.0
Date:
14.12.2021
Page:
26 of 83
Power LED (4)
If power is connected to the device this LED will illuminate. If this LED does not
illuminate check the power connection (see Section 5.2)
Status LED (5)
The status LED indicates whether the hardware has been properly initialized.
Information LEDs - Upper (6), left (7), bottom (8), right (9):
These LEDs are used to indicate the current state of the device.
In future these LEDs may be used to support the installation.
4.7
Warranty Seal & Product Label
Each unit is labelled with a warranty seal. If the seal is damaged or broken
the warranty is void.
Figure 14: Warranty Seal
The Product label is permanently attached to the left side of the device and shows besides
the Product Name, the company address, the serial number, the Identification Number (IC,)
the Product Marketing Name (PMN) as well as the Hardware Version Identification Number
(HVIN).
