This document is the property of KYMATI GmbH and must not be copied or disclosed without its written authorisation.
- KYMATI GmbH – 2021
KY.MAN.0105 (6.0)
KY-LOC 1D.02.01 User Manual
Doc.- No.: KY.MAN.0105
Version:
6.0
Date:
14.12.2021
Page:
21 of 83
The device can be mounted in any position, but the two devices need to have the same
orientation facing each other. It is recommended to install the device with the original KYMATI
bracket (KY-XTRA M.01.01 – more information can be found under
www.kymati.com
).
If there is rain or similar situations where water can fill
the hole of the pressure valve it is not allowed to mount
the device with the pressure valve (see chapter 4.3) on
the top side.
The device shall be mounted tightly so that it cannot be moved unintentionally.
A falling protection is recommended for the device to
avoid any accidents or damages. A falling protection as
shown below is available KY-XTRA.M.03.01. It is
recommended to use one of the 4xM6 bolts on the back
of the device.
