Kval 990FX, Operation And Service Manual

Page: 91 / 172

4-1
KVAL 990-FX Operation/Service Manual
CHAPTER 4 Maintenance of the 990-FX
This chapter describes preventative maintenance steps for KVAL 990-FX The content is geared to
guide technicians to keep a regular maintenance schedule for your KVAL machine. Keeping your
KVAL machine maintained is an important piece for successful operation of your door production
process.
Chapter 4 at a Glance
Section Name Summary Page
Maintenance Schedule
This section describes maintenance on the machine. The
maintenance is broken into machine cycle times and
describes the suggested maintenance steps to perform.
• 300 Cycles
• 600 Cycles
• 3,000 Cycles
• 12,000 Cycles
• 72,000 Cycles
page 4-2
Tool Changing4040
Schedule
Describes the suggested time frame to change the tools
in the machine page 4-14
Lubrication
Requirements
This section describes the lubrication requirements for
the machine, including types of lube to use. This section
includes:
• Linear Bearings, Flange Bearing, and Pillow Blocks
• Gear Motor Lubrication Requirements
• Ball Screws
• Description of Air Input
• Adjusting the Air Line Lubricator
• Priming the Air Line Lubricator
page 4-17
Replacing Bits
Procedures on how to change bits on the machine.
Includes ‘Good Practices’, and Torque values. page 4-31