Kval 990FX, Operation And Service Manual

Page: 72 / 172

About the Main Screen
KVAL Operation/Service Manual
2-42
Hinge Modes (Screws)
From these buttons you can toggle auto functions of the
screw functions of the Hoppers.
Screw Controls
•
Screws:
Press to Enable or Disable all Screw pickup.
•
Screw 1-3:
Press to Enable or Disable Screw pickup
for individual Hoppers.
•
Screw Drop
Press to Enable or Disable the Screw
Drops for all Six Shooters.
•
(Option) Split Jamb Stapler:
Press to Enable or Disable
the Split Jamb Stapler. For more information, see
“Option H: Securing Split Jambs” on page 2-27.
Settings include:
•
Lock:
Press the Lock button to enable or disable the lock section machining process. If
disabled, the back section will not machine the door
•
Lock (#1-3):
Set the lock position.
•
Lock Bore:
Press the
Lock Bore
button to enable or disable the Lock Bore
•
Bolt Drill:
Press the
Bolt Drill
button to enable or disable the Bolt Drill.
•
Face Plate:
Press the
Face Plate
button to enable or disable the Face Plate.
•
Lock Backset:
indicates the backset distance for the each downloaded preset.
•
Ball Catch (Option):
Press to Enable or Disable the Ball Catch.
Lock Group
In the Lock Group, the back section machining can be manipulated. There are three
lock set-ups to use.