4-6
Troubleshooting & Maintenance
Rebuilding the Internal NAND Flash Memory
Rebuilding the Internal NAND Flash Memory
It is unlikely but possible for the Internal NAND Flash Memory to become corrupted such that
normal hard reset and software update procedures fail. In particular, if the LCD displays the
following:
Internal File System Error. Low-level fmt error.
and recurs even
after a power cycle, the internal
fl
ash memory
fi
le system is probably corrupted.
The following procedure can be used to rebuild the Internal NAND Flash Memory using either
an xD card or the USB port via computer. Before starting you will need a special utility program
called PC3FT040.BIN or a later version (last 3 digits are a higher number). This program may be
downloaded from the kurzweilmusicsystems.com website. This program can reformat the
internal
fl
ash memory then copy needed system
fi
les to it. The Diagnostics
fi
le can also be
downloaded from the website.
Rebuilding with an xD Card
Warning
: Rebuilding the Internal NAND Flash Memory also does a hard reset erasing all user
created
fi
les and restores the unit to factory settings.
The following assumes that you are familiar with the procedures to enter the Boot Loader and
perform normal system updates using an xD Card or the USB port via computer.
1. 1. Using an xD card reader/writer, copy these four
fi
les to an xD card:
•
File Transfer utility, PC3FT040.BIN or higher
•
PC3 Operating System
fi
le, PC3OS111.BIN or higher
•
PC3 Diagnostics
fi
le, PC3DG018 or higher
•
PC3 Objects
fi
le, PC3OB111.PC3 or higher
2. Turn on the PC3x and enter the Boot Loader. Then insert the xD card into the slot on the
PC3x.
3. Press the
File Utilities
soft button.
4.
5. Press the
EXEC from file
soft button.
6. Using the Alpha Wheel, select the File Transfer Utility
fi
le then press the
CHOOSE
soft
button. In a couple of seconds the program will run and display a new menu.
7. Press the
FORMAT FLASH
soft button. Press the
FORMAT
soft button again to con
fi
rm.
Formatting will take about 5-10 seconds.
8. A new menu should appear. The third line will display,
File system not set up
.
9. Press the
SETUP SYSTEM
soft button. A message
File structure built
will appear
brie
fl
y then another menu.
10. The
fi
rst line should display,
Choose a synth executable file:
. Use the Alpha
Wheel to select the PC3 Operating System
fi
le then press the
CHOOSE
soft button.
Installation will take about
fi
ve seconds.