Kurzweil PC3A User Manual Download Page 336

Page: 336 / 423

15-14

Tutorial: Song Mode

7. Use the

From

and

parameters to set the range of time from which you want to remove

your volume automation. You can play the song and watch the

Locate

field to determine

these times. For this example, let’s say that we want to erase volume automation from bar 3

(see below.)

8. Press the

soft button to delete the selected volume automation. A screen will appear

reading “Erase Operation Completed!” Press the

soft button to return to the

EditSong:TRACK page (see below.)

9. Once back on the EditSong:TRACK page, press the

Play/Pause

button to hear the result.

Next, press the

Exit

button twice to return to the Song mode MAIN page. You will be

presented with the Song: Save Changes page, where you can decide whether or not to save

the changes you have made.

10. To re-record volume automation, follow the steps in

Part 6 b

, above.

Summary of Contents for PC3A








































































































































































































































































































































































































































Search results

Summary of Contents for PC3A

Reviews:

Related manuals for PC3A

Brands by name

Popular brands

Kurzweil PC3A, User Manual

Search results

Summary of Contents for PC3A

Reviews:

Related manuals for PC3A

Brands by name

Popular brands