Kurzweil PC3A User Manual Download

Page: 106 / 423

Program Mode

Function Soft Buttons

6-51

INFO

Press the INFO soft button to go to the INFO page where you can edit the controller assignment

info for the current program. Each info entry is a description of a program parameter that you

have assigned to be controlled by a physical controller or MIDI CC number. Info can be viewed

from the Program mode or Setup mode main page by pressing the Info soft button. If the Display

parameter is set to Ctls on the Master Mode MAIN page, controllers with info text will show the

info on the left side of the Program mode or Setup Mode main page when moved (see

Display

page 11-3

for details.)

On the INFO page, use the

Chan/Layer

buttons to scroll through the current program’s list of

controller assignment info. Each assignment info entry has a MIDI controller number and a Text

parameter to describe what the assignment controls. One info entry can be made for each MIDI

CC number.
To edit the text of a controller assignment, press the

Text

soft button.

To create a new controller

assignment info entry, press the

New

soft button (you will be prompted for a MIDI controller

number.) To create a new controller assignment info entry with the same text as the current info

entry, press the

Dup

soft button (you will be prompted for a new MIDI controller number, only

one info entry can be made for each MIDI CC number.) To delete the current controller

assignment info entry, press the

Delete

soft button (you will be prompted to confirm or cancel.)

To return to the program editor press the

Done

soft button or the

Exit

button. See

Export

on page

13-15

for details on exporting program info.

Automatic Info Creation

Note: The following does not apply to controller assignments made for effects within the

Chains editor. Info text for Chains must be manually created using the INFO page in the

Chains Editor.

When assigning a controller to a parameter on any of the Program Editor pages, an Info text entry

is automatically created. An

appears on the top line of the page to indicate that Info text has

been created. If you return the controller assignment to

OFF

, the

disappears, indicating that the

Info text has been removed (unless you have gone to the INFO page, see note below.) The

automatically created info will use the parameter name for the Info text. To rename the Info text,

press the Edit button while the controller assignment field is still selected. This will bring you to

the Info Editor page (see above) and the Info entry for the assigned controller. From the Info

Editor page, press the Exit button to return to the page where you made the controller

assignment.

Note: After assigning a controller to parameter, if you go to the INFO page, the Info text

entries for each controller assignment will remain set unless you remove them with the Delete

soft button on the INFO page. If you change the controller assignment for a parameter after

going to the INFO page, the parameter’s last Info text entry will remain in addition to the

newer Info text entry automatically made for the controller assignment. This is done a to

ensure that user renamed Info text does not get deleted if a controller assignment was

accidentally changed while editing the program. To remove an unused Info text entry, locate

the entry on the INFO page and use the Delete soft button.

Function Soft Buttons

This section describes the soft buttons that perform specific functions, as opposed to selecting

programming pages. The descriptions below are arranged in the order in which you would see

the soft buttons if you pressed the

more>

button repeatedly. You can always get to these buttons,

regardless of which page is currently selected.

Summary of Contents for PC3A








































































































































































































































































































































































































































Search results

Summary of Contents for PC3A

Reviews:

Related manuals for PC3A

Brands by name

Popular brands

Kurzweil PC3A, User Manual

Search results

Summary of Contents for PC3A

Reviews:

Related manuals for PC3A

Brands by name

Popular brands