9-10
Effects and Effect Mode
Effects Overview
Editing Effect-boxes
To edit the parameters of an effect, select its effect-box on the MAIN page and press the
Edit
button. For
each effect, there are one or more pages of parameters that are specific to that effect.
See
Effects Parameters
on page 9-12
for details on parameters for each type of effect. Any
parameter controlled by an effect Mod will display a value of
FxMod
and cannot be edited. To
return to the MAIN page of the chain editor, press the
Exit
button.
The MOD Pages
There are three pages for configuring effects mods: MOD1, MOD2, and MOD3. All three pages
are essentially identical in appearance and function. See below for an example MOD page:
Box
The Box parameter specifies which effect-box in the Chain to which the Mod will be applied.
Param
The Param parameter selects which parameter of the specified box’s effect will be modulated.
Adjust
The Adjust parameter sets a fixed value for the specified parameter (Param) that is applied before
any modulation.
Source
The Source parameter determines the Control source that will modulate the parameter (Param)
in real-time. This can be any of the normal channel Control sources (sliders, mod wheel, pedals,
etc.) or one of the Chain-specific Control sources (FXLFOs, FXASRs, and FXFUNs).
Depth
The Depth parameter determines the range of modulation that the Controller will apply. When
the Control source has a value of
0
, the parameter’s (Param’s) value will be the Adjust value.
When the control source is all the way up, the parameter’s (Param’s) value will be the Adjust
value plus the Depth value.
