Master Mode
Reset
11-17
CLOCK
Pressing the CLOCK soft button allows you to view the PC3A’s System Clock (see below.) When
objects are saved, they are time stamped with the date and time of this clock. This time stamp can
be seen in the file properties when viewing the files with a computer.
The
Format
soft button changes the view format of the date on this page. The
Set
soft button
brings you to the Set clock page where you can set the system clock and date. Use the cursor to
move between fields, use the alpha wheel or plus/minus buttons to change each field. On the Set
page, press the
Set
soft button
to save changes and return to the System Clock page, or the
Cancel
soft button to return to the System Clock page without saving changes.
The
Chrono
soft button brings up the PC3A’s Chronometer (stop-watch) page (see below.) This
can be useful for timing the length of songs or performances. Press the
Start
soft button to begin
timing. The Chronometer will continue running even if you exit to other screens or modes. Press
the
Stop
soft button to stop timing, the
Reset
soft button to reset the Chronometer, or the
Cancel
soft button to return to the System Clock page.
Reset
Press the
Reset
soft button if you want to return your PC3A’s memory to the state it was in when
you bought it.
CAUTION:
Resetting the PC3A system causes ALL parameters to be restored to default values and ALL
user objects to be erased. The PC3A will ask you if you want to delete everything (meaning all RAM
objects), and a pair of
Yes/No
soft buttons will appear. Press
No
if you want to keep any objects you have
saved. Press
Yes
, and everything stored in RAM will be erased. After a few seconds, the PC3A will return
to the Program mode page.
