Kurzweil K2661, Musician’S Reference Manual

Page: 169 / 500

KDFX Reference
KDFX Algorithm Specifications
10-87
causing the image to collapse into a center point source. A setting of 100%
causes the left and right channels to swap each regeneration, which is also
referred to as “ping-ponging”.
All other parameters Refer to 4-Tap Delay BPM documentation.
Reverb
The reverbs offered in these combination effects is MiniVerb. Information about it can be found in the
MiniVerb documentation. Parameters associated with this reverb begin with Rv.
MiniVerb
Pitcher
The pitchers offered in these effects are the same as that found in its stand alone version. Review the
Pitcher section for more information. Parameters associated with this effect begin with Pt.
Parameters for Pitcher
Shaper
The shaper offered in these combination effects have the same sonic qualities as those found in VAST.
Refer to the section on shapers in the Musician’s Guide for an overview. Parameters associated with this
effect begin with Shp.
This KDFX shaper also offers input and output 1 pole (6dB/oct) lopass fi lters controlled by the Shp Inp LP
and Shp Out LP respectively. There is an additional output gain labeled Shp OutPad to compensate for the
added gain caused by shaping a signal.
Parameters for Shaper
Rv Type Hall1
Rv Time 0.5 to 30.0 s; Inf
Rv DiffScl 0.00 to 2.00x Rv Density 0.00 to 4.00x
Rv SizeScl 0.00 to 4.00x Rv HF Damp 16 to 25088 Hz
Rv PreDlyL 0 to 620 ms Rv PreDlyR 0 to 620 ms
Pt Pitch C-1 to G9
Pt Offset -12.0 to 12.0 ST
Pt Odd Wts -100 to 100 %
Pt PairWts -100 to 100 %
Pt 1/4 Wts -100 to 100 %
Pt 1/2 Wts -100 to 100 %
Shp Inp LP 16 to 25088 Hz
Shp Amt 0.10 to 6.00 x
Shp Out LP 16 to 25088 Hz
Shp OutPad Off; -79.0 to 0.0 dB