Kurzweil K2661, Musician’S Reference Manual

Page: 236 / 500

10-154
KDFX Reference
KDFX Algorithm Specifications
a sine wave when set to 100% smoothing. The sudden change in amplitude of the sawtooths develops a
more gradual slope with smoothing, ending up as triangle waves when set to 100% smoothing.
Figure 10-70 Configurable Wave Shapes
Parameters
Page 1
Page 2
Wet/Dry The amount of modulated (wet) signal relative to unaffected (dry) signal as a percent.
Out Gain The overall gain or amplitude at the output of the effect.
LFO Tempo Basis for the rates of the LFO, as referenced to a musical tempo in bpm (beats per minute).
When this parameter is set to “System”, the tempo is locked to the internal sequencer
tempo or to incoming MIDI clocks. When it is set to “System”, sources (FUNs, LFOs, ASRs
etc.) will have no effect on the Tempo parameter.
LFO Period Sets the LFO rate based on the Tempo determined above: the number of beats
corresponding to one period of the LFO cycle. For example, if the LFO Period is set to “4”,
the LFOs will take four beats to pass through one oscillation, so the LFO rate will be 1/4th
of the Tempo setting. If it is set to “6/24” (=1/4), the LFO will oscillate four times as fast as
the Tempo. At “0”, the LFOs stop oscillating and their phase is undetermined (wherever
they stopped).
LFO Shape The waveform type for the LFO. Choices are Sine, Saw+, Saw-, Pulse, and Tri.
Wet/Dry 0 to 100%wet Out Gain Off, -79.0 to 24.0 dB
LFO Tempo System, 1 to 255 BPM LFO Shape Sine
LFO Period 1/24 to 32 bts LFO PlsWid 0 to 100%
LFO Smooth 0 to 100%
FilterType Lowpass Min Freq 58 to 8372 Hz
Max Freq 58 to 8372 Hz
Resonance 0 to 50 dB
L Phase 0.0 to 360.0 deg R Phase 0.0 to 360.0 deg
L R
0Hz 2k 4k 6k 0Hz 2k 4k 6k
Sine Saw+ Saw- Pulse Tri
PulseWidth