Kurzweil K2661, Musician’S Reference Manual

Page: 132 / 500

10-50
KDFX Reference
KDFX Algorithm Specifications
140 Moving Delay
Generic stereo moving delay lines
PAUs: 1
Moving Delay is identical to Dual MovDelay except that the algorithm now has stereo controls rather
than dual mono. This means all the controls except L Pan and R Pan are no longer dual left and right but
are ganged into single controls controlling both left and right channels.
Parameters:
Page 1
Page 2
Wet/Dry The relative amount of input signal and effected signal that is to appear in the fi nal effect
output mix for each input channel. When set to 0% , the output is taken only from the
input (dry) signal. When set to 100% , the output is all wet.
Out Gain The overall gain or amplitude at the output of the effect.
L Pan, R Pan The output panning position of each moving delay circuit. 0% is center; Negative values
pan left, while positive values pan right.
Delay Adjusts the delay time for the moving delay circuits, which is the center of LFO excursion.
LFO Mode Adjusts the LFO excursion type. In Flange mode, the LFO is optimized for fl ange effects
and LFO Dpth adjusts the excursion amount. In ChorTri and ChorTrap modes, the LFO is
optimized for triangle and trapezoidal pitch envelopes respectively, and LFO Dpth
adjusts the amount of chorus detuning. In Delay mode, the LFO is turned off leaving a
basic delay. LFO Rate and LFO Dpth in Delay mode are disabled.
LFO Rate Adjusts the LFO speed for the moving delay circuits.
LFO Depth In Flange LFO mode, this adjusts an arbitrary LFO excursion amount. In ChorTri and
ChorTrap modes, this controls the chorus detune amount. In delay mode, this is disabled.
Feedback Adjusts the level of the moving delay circuits’ output signal fed back into their own
inputs. Negative values polarity invert the feedback signal.
HF Damping Adjusts the cutoff frequency of a 1-pole (6dB/oct) lowpass fi lter in the moving delay
circuits.
Wet/Dry 0 to 100 % Out Gain Off, -79.0 to 24.0 dB
L Pan -100 to 100 % R Pan -100 to 100 %
Delay 0.0 to 1000.0 ms
LFO Mode ChorTri, ChorTrap, Delay, Flange
LFO Rate 0.00 to 10.00 Hz
LFO Depth 0.0 to 200.0 %
Feedback -100 to 100 %
HF Damping 8 to 25088 Hz