Kurzweil K2661 Musician’S Reference Manual Download Page 307

Page: 307 / 500

KDFX Reference

KDFX Algorithm Specifications

10-225

Page 2

Page 3

In/Out

When set to “In” the effect is active; when set to “Out” the effect is bypassed.

Out Gain

The overall gain or amplitude at the output of the effect.

CrossOver1

Adjusts one of the -6dB crossover points at which the input signal will be divided into the
high, mid and low bands.

CrossOver2

Adjusts the other -6dB crossover points at which the input signal will be divided into the
high, mid and low bands.

Enable

Low, Mid, and High. Turns processing for each band on or off. Turning each of the 3 bands
off results in a dry output signal.

Drive

Low. Mid, and High. Adjusts the input into each transfer. Increasing the drive will
increase the effects.

Xfer

Low, Mid, and High; Xfer1 and Xfer2 for Mid and High. Adjusts the intensity of the
transfer curves.

Delay

Low, Mid, and High. Adjusts the number of samples the each signal is delayed.

Mix

Low, Mid, and High. Adjusts the output gain of each band.

Lo Enable

On or Off

Mid Enable

On or Off

Lo Drive

Off, -79.0 to 24.0 dB

Mid Drive

Off, -79.0 to 24.0 dB

Lo Xfer

-100 to 100%

Mid Xfer1

-100 to 100%

Mid Xfer2

-100 to 100%

Lo Delay

0 to 1000 samp

Mid Delay

0 to 500 samp

Lo Mix

Off, -79.0 to 24.0 dB

Mid Mix

Off, -79.0 to 24.0 dB

Hi Enable

On or Off

Hi Drive

Off, -79.0 to 24.0 dB

Hi Xfer1

-100 to 100%

Hi Xfer2

-100 to 100%

Hi Delay

0 to 500 samp

Hi Mix

Off, -79.0 to 24.0 dB

Summary of Contents for K2661





















































































































































































































































































































































































































































































































Search results

Summary of Contents for K2661

Reviews:

Related manuals for K2661

Brands by name

Popular brands

Kurzweil K2661, Musician’S Reference Manual

Search results

Summary of Contents for K2661

Reviews:

Related manuals for K2661

Brands by name

Popular brands