KT&C Omni-IP KNR-p16Px8 User Manual Download

Page: 79 / 195

KNR-p4Px4 KNR-p16Px8 User Manual

Click

Search

button to get the search result information. You may refer to the right-side bar for the result.

Figure 6. 10

Search Result Bar(Alarm In and Motion)

Click

button to play back the file.

Notes:

Pre-play and post-play can be configured.

If the event is set to trigger the recording of multiple channels, clicking the

will pop up the Synch

Playback interface. You can select the channels to play back synchronously.

You can click the

Back

button to return to the search interface.

Playback interface.

The toolbar in the bottom part of Playback interface can be used to control playing process.

Summary of Contents for Omni-IP KNR-p16Px8




































































































































































































Search results

Summary of Contents for Omni-IP KNR-p16Px8

Reviews:

Related manuals for Omni-IP KNR-p16Px8

Brands by name

Popular brands

KT&C Omni-IP KNR-p16Px8, User Manual

Search results

Summary of Contents for Omni-IP KNR-p16Px8

Reviews:

Related manuals for Omni-IP KNR-p16Px8

Brands by name

Popular brands