KT&C Omni-IP KNR-p16Px8 User Manual Download Page 71

Page: 71 / 195

KNR-p4Px4 KNR-p16Px8 User Manual

Figure 5. 29

Unlocking Attention

Protect file by setting HDD property to Read-only

Steps:

Enter HDD setting interface.

Menu> HDD

Figure 5. 30

HDD General

Click

to edit the HDD you want to protect.

Figure 5. 31

HDD General- Editing

Note:

To edit HDD property, you need to set the storage mode of the HDD to Group. See

Chapter Managing HDD

Group.

Set the HDD property to Read-only.

Click

to save settings and back to the upper level menu.

Notes:

You can’t save any files in a Read-only HDD. If you want to save files in the HDD, change the property to R/W.

If there is only one HDD and is set to Read-only, the NVR can’t record any files. Only live view mode is

available.

Summary of Contents for Omni-IP KNR-p16Px8




































































































































































































Search results

Summary of Contents for Omni-IP KNR-p16Px8

Reviews:

Related manuals for Omni-IP KNR-p16Px8

Brands by name

Popular brands

KT&C Omni-IP KNR-p16Px8, User Manual

Search results

Summary of Contents for Omni-IP KNR-p16Px8

Reviews:

Related manuals for Omni-IP KNR-p16Px8

Brands by name

Popular brands