KT&C Omni-IP KNR-p16Px8, User Manual

Page: 113 / 195

KNR-p4Px4 KNR-p16Px8 User Manual
113
Choose one day of a week and Max. eight time periods can be set within each day.
Note: Time periods shall not be repeated or overlapped.
5. Select Linkage Action tab to set up alarm response actions of the alarm input (please refer to Chapter Setting
Alarm Response Actions ).
Repeat the above steps to set up arming schedule of other days of a week. You can also use Copy button to copy
an arming schedule to other days.
Figure 8. 6 Set Arming Schedule of Alarm Input
6. If necessary, select PTZ Linking tab and set PTZ linkage of the alarm input.
Set PTZ linking parameters and click OK to complete the settings of the alarm input.
Note: Please check whether the PTZ or speed dome supports PTZ linkage.
One alarm input can trigger presets, patrol or pattern of more than one channel. But presets, patrols and patterns
are exclusive.
Figure 8. 7 Set PTZ Linking of Alarm Input
7. If you want to set handling action of another alarm input, repeat the above steps or just copy the above settings to
it.