KT&C Omni-IP KNR-p16Px8, User Manual

Page: 36 / 195

KNR-p4Px4 KNR-p16Px8 User Manual
36
3.2 Operations in Live View Mode
In live view mode, there are many functions provided. The functions are listed below.
•
Single Screen : showing only one screen on the monitor.
•
Multi-screen: showing multiple screens on the monitor simultaneously.
•
Auto-switch: the screen is auto switched to the next one. And you must set the dwell time for each screen on the
configuration menu before enabling the auto-switch.
Menu>Configuration>Live View>General.
•
Start Recording: continuous record and motion detection record are supported.
•
Output Mode: select the output mode to Standard, Bright, Gentle or Vivid.
•
Playback: playback the recorded videos for current day.
•
Add IP Camera: The shortcut to add IP camera automatically or manually.
3.2.1 Using the Mouse in Live View
Table 3. 2 Mouse Operation in Live View
Name Description
Menu Enter the main menu of the system by right clicking the mouse.
Single Screen
Switch to the single full screen by choosing channel number from the
dropdown list.
Multi-screen Adjust the screen layout by choosing from the dropdown list.
Previous Screen Switch to the previous screen.
Next Screen Switch to the next screen.
Start/Stop Auto-switch Enable/disable the auto-switch of the screens.
Start Recording Start continuous recording or motion detection recording of all
channels.
Add IP Camera
Add IP camera automatically or manually.
Playback
Enter the playback interface and start playing back the video of the
selected channel immediately.
Output Mode
Four modes of output supported, including Standard, Bright, Gentle
and Vivid.
Note: The dwell time of the live view configuration must be set before using Start Auto-switch.
Note: If the corresponding camera supports intelligent function, the Reboot Intelligence option is included when
right-clicking mouse on this camera.