KT&C Omni-IP KNR-p16Px8, User Manual

Page: 32 / 195

KNR-p4Px4 KNR-p16Px8 User Manual
32
Figure 2. 22 Protocol Setting
3. Choose the protocols you just added to validate the connection of the network camera.
2.3.3 Editing IP cameras connected to the PoE interfaces
The PoE interfaces enables the NVR system to pass electrical power safely, along with data, on Ethernet cabling to the
connected network cameras.
The NVRs provides 4 or 8 PoE interfaces which can connect to 4 or 8 network cameras directly; and if you disable the
PoE interface, you can also connect to the online network cameras. And the PoE interface supports the Plug-and-Play
function.
Example:
When you want to connect 1 online camera and connect 3 network cameras via PoE interfaces, you must disable 1 PoE
interface in the Edit IP camera panel.
To add Cameras for NVR supporting PoE function:
Before you start:
Connect the network cameras via the PoE interfaces.
Steps:
1. Enter the Camera Management interface.
Main menu> Camera> Camera
You can see the connected cameras are listed.