KT&C ENR Series User Manual Download Page 99

Page: 99 / 212

User Manual of Network Video Recorder

7.1.2

Backing up by Normal Video Search

Purpose:

The record files can be backup to various devices, such as USB devices (USB flash drives, USB HDDs, USB

writer), SATA writer and e-SATA HDD.

Backup using USB flash drives and USB HDDs

Steps:

Enter Export interface.

Menu>Export>Normal

Select the cameras to search.

Set search condition and click

Search

button to enter the search result interface. The matched video files are

displayed in Chart or List display mode.

Figure 7. 5

Normal Video Search for Backup

Select video files or pictures from the Chart or List to export.

Click

to play the record file if you want to check it.

Check the checkbox before the record files you want to back up.

The size of the currently selected files is displayed in the lower-left corner of the window.

Summary of Contents for ENR Series





















































































































































































































Search results

Summary of Contents for ENR Series

Reviews:

Related manuals for ENR Series

Brands by name

Popular brands

KT&C ENR Series, User Manual

Search results

Summary of Contents for ENR Series

Reviews:

Related manuals for ENR Series

Brands by name

Popular brands