KT&C ENR Series User Manual Download Page 95

Page: 95 / 212

User Manual of Network Video Recorder

6.1.8

Playing Back by Sub-periods

Purpose:

The video files can be played in multiple sub-periods simultaneously on the screens.

Steps:

Enter Playback interface.

Menu > Playback

Select

Sub-periods

from the drop-down list in the upper-left corner of the page to enter the Sub-periods

Playback interface.

Select a date and start playing the video file.

Select the Split-screen Number from the dropdown list. Up to 16 screens are configurable.

Figure 6. 19

Interface of Sub-periods Playback

According to the defined number of split-screens, the video files on the selected date can be divided into average

segments for playback. E.g., if there are video files existing between 16:00 and 22:00, and the 6-screen display

mode is selected, then it can play the video files for 1 hour on each screen simultaneously.

Summary of Contents for ENR Series





















































































































































































































Search results

Summary of Contents for ENR Series

Reviews:

Related manuals for ENR Series

Brands by name

Popular brands

KT&C ENR Series, User Manual

Search results

Summary of Contents for ENR Series

Reviews:

Related manuals for ENR Series

Brands by name

Popular brands