KT&C ENR Series User Manual Download

Page: 133 / 212

User Manual of Network Video Recorder

132

Figure 10. 5

Behavior Search Results

Play the behavior analysis picture related video file.

You can double click on a picture from the list to play its related video file in the view window on the top

right, or select a picture item and click

to play it.

You can also click

to stop the playing, or click

to play the previous/next file.

If you want to export the captured pictures to local storage device, connect the storage device to the device

and click

Export All

to enter the Export interface.

Click

Export

to export all pictures to the storage device.

10.3

Plate Search

Purpose:

You can search and view the matched captured vehicle plate picture and related information according to

the plate searching conditions including the start time/end time, country and plate No..

Steps:

Enter the

Plate Search

interface.

Menu > VCA Search > Plate Search

Select the camera (s) for the plate search.

Specify the start time and end time for searching the matched plate pictures.

Summary of Contents for ENR Series





















































































































































































































Search results

Summary of Contents for ENR Series

Reviews:

Related manuals for ENR Series

Brands by name

Popular brands

KT&C ENR Series, User Manual

Search results

Summary of Contents for ENR Series

Reviews:

Related manuals for ENR Series

Brands by name

Popular brands