KT&C ENR Series User Manual Download Page 182

Page: 182 / 212

User Manual of Network Video Recorder

181

14.3

Importing/Exporting IP Camera Info

Purpose:

The information of added IP camera can be generated into an excel file and exported to the local device for backup,

including the IP address, manage port, password of admin, etc.. And the exported file can be edited on your PC,

like adding or deleting the content, and copy the setting to other devices by importing the excel file to it.

Steps:

Enter the camera management interface.

Menu > Camera > IP Camera Import/Export

Click the IP Camera Import/Export tab, the content of detected plugged external device appears.

Click the

Export

button to export configuration files to the selected local backup device.

To import a configuration file, select the file from the selected backup device and click the

Import

button.

After the importing process is completed, you must reboot the NVR.

Summary of Contents for ENR Series





















































































































































































































Search results

Summary of Contents for ENR Series

Reviews:

Related manuals for ENR Series

Brands by name

Popular brands

KT&C ENR Series, User Manual

Search results

Summary of Contents for ENR Series

Reviews:

Related manuals for ENR Series

Brands by name

Popular brands