KT&C ENR Series, User Manual

Page: 7 / 212

User Manual of Network Video Recorder
6
Product Key Features
General
l Connectable to network cameras, network dome and encoders.
l Connectable to the third-party network cameras like ACTI, Arecont, AXIS, Bosch, Brickcom, Canon,
PANASONIC, Pelco, SAMSUNG, SANYO, SONY, Vivotek and ZAVIO, and cameras that adopt ONVIF
or PSIA protocol.
l
Connectable to the smart IP cameras.
l PAL/NTSC adaptive video inputs.
l Each channel supports dual-stream.
l Up to 16 network cameras can be connected.
l Independent configuration for each channel, including resolution, frame rate, bit rate, image quality, etc.
l The quality of the input and output record is configurable.
Local Monitoring
l Simultaneous HDMI
TM
and VGA outputs.
l HDMI
TM
and VGA outputs at up to 1920 × 1080 resolution.
l Multiple screen display in live view is supported, and the display sequence of channels is adjustable.
l Live view screen can be switched in group, and manual switch and automatic cycle live view are also
provided, and the interval of automatic cycle can be adjusted.
l Quick setting menu is provided for live view.
l Motion detection, video tampering, VCA (Video Content Analysis) alarm, video exception alert and video
loss alert functions.
l Privacy mask.
HDD Management
l For 8ch/16ch models, 2 SATA hard disks can be connected;
For 4ch models, 1 SATA hard disk can be connected;
l Each disk with a maximum of 6TB storage capacity.
l 8 network disks (NAS /IP SAN disks) can be connected.
l Support S.M.A.R.T. and bad sector detection.
l HDD group management.
l Support HDD standby function.
l HDD property: redundancy, read-only, read/write (R/W).
l HDD quota management; different capacity can be assigned to different channel.
Recording and Playback
l
Holiday recording schedule configuration.
l Continuous and event video recording parameters.
l Multiple recording types: manual, continuous, alarm, motion, motion | alarm, motion & alarm, and VCA.
l 8 recording time periods with separated recording types each day.
l
Pre-record and post-record for alarm, motion detection for recording, and pre-record time for schedule and
manual recording.
l Searching record files by events (alarm input/motion detection/VCA).
l Playback by sub-periods.
l Tag adding for record files, searching and playing back by tags.
l Locking and unlocking record files.