KT&C ENR Series User Manual Download

Page: 100 / 212

User Manual of Network Video Recorder

Figure 7. 6

Result of Normal Video Search for Backup

Export the video files or picture files.

Click

Export All

button to export all the files.

Or you can select recording files you want to back up, and click

Export

button to enter Export interface.

If the inserted USB device is not recognized:

•

Click the

Refresh

button.

•

Reconnect device.

•

Check for compatibility from vendor.

You can also format USB flash drives or USB HDDs via the device.

Figure 7. 7

Export by Normal Video Search using USB Flash Drive

Stay in the Exporting interface until all record files are exported with pop-up message box “Export finished”.

Summary of Contents for ENR Series





















































































































































































































Search results

Summary of Contents for ENR Series

Reviews:

Related manuals for ENR Series

Brands by name

Popular brands

KT&C ENR Series, User Manual

Search results

Summary of Contents for ENR Series

Reviews:

Related manuals for ENR Series

Brands by name

Popular brands