KT&C ENR Series User Manual Download

Page: 85 / 212

User Manual of Network Video Recorder

Figure 6. 2

Right-click Menu under Live View

Pressing numerical buttons will switch playback to the corresponding channels during playback process.

Playback by Time

Purpose:

Play back video files recorded in specified time duration. Multi-channel simultaneous playback and channel switch

are supported.

Steps:

Enter playback interface.

Menu > Playback

Check the checkbox of channel(s) in the channel list and then double-click to select a date on the calendar.

Figure 6. 3

Playback Calendar

If there are record files for that camera in that day, in the calendar, the icon for that day is displayed as

Otherwise it is displayed as

Summary of Contents for ENR Series





















































































































































































































Search results

Summary of Contents for ENR Series

Reviews:

Related manuals for ENR Series

Brands by name

Popular brands

KT&C ENR Series, User Manual

Search results

Summary of Contents for ENR Series

Reviews:

Related manuals for ENR Series

Brands by name

Popular brands