KT&C ENR Series User Manual Download

Page: 186 / 212

User Manual of Network Video Recorder

185

14.6

Restoring Default Settings

Steps:

Enter the Default interface.

Menu > Maintenance > Default

Figure 14. 9

Restore Defaults

Select the restoring type from the following three options.

Restore Defaults:

Restore all parameters, except the network (including IP address, subnet mask, gateway, MTU,

NIC working mode, default route, server port, etc.) and user account parameters, to the factory default settings.

Factory Defaults:

Restore all parameters to the factory default settings.

Restore to Inactive:

Restore the device to the inactive status.

Click the

button to restore the default settings.

The device will reboot automatically after restoring to the default settings.

Summary of Contents for ENR Series





















































































































































































































Search results

Summary of Contents for ENR Series

Reviews:

Related manuals for ENR Series

Brands by name

Popular brands

KT&C ENR Series, User Manual

Search results

Summary of Contents for ENR Series

Reviews:

Related manuals for ENR Series

Brands by name

Popular brands