KT&C ENR Series User Manual Download

Page: 183 / 212

User Manual of Network Video Recorder

182

14.4

Importing/Exporting Configuration Files

Purpose:

The configuration files of the NVR can be exported to local device for backup; and the configuration files of one

NVR can be imported to multiple NVR devices if they are to be configured with the same parameters.

Steps:

Enter the Import/Export Configuration File interface.

Menu > Maintenance >Import/Export

Figure 14. 6

Import/Export Config File

Click the

Export

button to export configuration files to the selected local backup device.

To import a configuration file, select the file from the selected backup device and click the

Import

button.

After the import process is completed, you must reboot the NVR.

After having finished the import of configuration files, the device will reboot automatically.

Summary of Contents for ENR Series





















































































































































































































Search results

Summary of Contents for ENR Series

Reviews:

Related manuals for ENR Series

Brands by name

Popular brands

KT&C ENR Series, User Manual

Search results

Summary of Contents for ENR Series

Reviews:

Related manuals for ENR Series

Brands by name

Popular brands