7 Operation
41 of 104
mini-Compacta
2317.886/16-EN
Table 16:
LED description
LED
Description
Green
Trouble-free operation
Yellow
One or more warnings are active.
Red
One or more alerts are active.
LED for pump set information
These LEDs provide information about the operating status of each pump set.
Table 17:
LED per pump set
LED
Description
Green
Pump set is ready for operation.
Flashing green
Pump set is in operation.
Yellow
Pump set is OFF (manual-0-automatic selector switch set to
0).
Flashing yellow
Pump set is in manual mode (manual-0-automatic selector
switch set to manual).
Red
Pump set is locked when an alarm is active or no enable
signal is received.
"High water" LED
This LED signals high water. Fault messages with a higher priority overwrite the high
water alert.
Table 18:
LED per pump set
LED
Description
Red
High water
▪
Forces a start-up of the pump sets.
– Exception: ATEX units with defective sensor. Check
that the sensors function properly.
7.1.2 Display
The following information is displayed:
Fig. 22:
Display
1
Parameter
2
Parameter/measured value
3
Alert
