4 Description
18 of 104
mini-Compacta
2317.886/16-EN
4.4 Design details
Design
▪
Floodable sewage lifting unit
4)
▪
Gas-tight and water-tight plastic collecting tank, pump unit, sensors and control
unit
▪
Ready-to-connect sewage lifting unit
Drive
▪
Surface-cooled
▪
AC motor / three-phase asynchronous motor
▪
Thermal overload protection
▪
To VDE 0530, Part 1/IEC 34-1
▪
Enclosure IP68 (permanently submerged) to EN 60529 / IEC 529
▪
Thermal class F
▪
Electrical voltage 400 V (three-phase asynchronous motor) / 230 V (AC motor)
▪
Frequency 50 Hz
▪
DOL starting
Impeller type
▪
Free-flow impeller
▪
Cutter
Bearings
▪
Grease-packed, maintenance-free rolling element bearings
Shaft seal
mini-Compacta US (40 litres) / U (60 litres) / U (100 litres) / UZ (150 litres):
▪
Impeller end, 1 shaft seal ring
▪
Drive end: 1 shaft seal ring
▪
A grease fill is provided between the impeller-end and drive-end shaft seals.
mini-Compacta US (100 litres) / UZS (150 litres) / variant C:
▪
Impeller end, 1 mechanical seal
▪
Drive end: 1 shaft seal ring
▪
An oil reservoir, which is supplied filled with ecologically acceptable white oil, is
fitted between the impeller-end and drive-end shaft seals.
4)
Maximum flooding height: 2 metres, maximum flooding period: 7 days (does not apply to control unit). The lifting unit
must be cleaned and serviced after it has been flooded.
