23
EN
Perform carrier level adjustment by changing positioning of screws in the connector, pos. 1.
After reaching the desired carrier level, thoroughly and firmly tighten the screw connections.
Because it is possible for the screws to become spontaneously loose, each time before using the carrier, check their tightening.
If the screws became loose, tighten them immediately.
Carrier capacity is 18 kg or 25 kg, depending on the model used.
It is forbidden to perform any modifications to the carrier design. During a ride with encumbered carrier pay attention to different bicycle reactions when taking turns and braking and to
uniform luggage weight distribution.
For their own safety, users should install red reflective lights in the rear part of the carrier – they increase cyclist visibility – in particular at dusk and at night.
If rear light is installed on the seat pipe, locate the luggage in such a way that it does not diminish visibility of warning lights.
Suggestions:
• Permissible weight of the bicycle and the cyclist according to the “BICYCLE TYPES AND THEIR USE” of this manual (p. 7)
• Joint elements should be correctly tightened and often checked
• The carrier is not adjusted for pulling a trailer
• The reflexive light or the light may not be covered by the luggage
• All mobile parts of the luggage should be secured against entangling in the wheel
• The luggage should be uniformly placed on both sides of the carrier
Caution!!!
• Check if geometric data and durability of the bicycle on which the carrier is to be installed are conforming with design data
• Do not modify the design of the carrier
• When the carrier is loaded, riding properties of the bicycle may change, in particular ease of control and braking efficiency
• Make sure that the luggage is secured to the carrier
• It is forbidden to attack wagons of any type to the carrier
BICYCLE CARRIER MAY NOT BE USED FOR DIRECT TRANSPORT OF INDIVIDUALS
Installing bicycle baby seats is permissible in case of carriers with 18 kg capacity (9-15 kg seat) or 25 kg (9-22 kg seat).
Install baby seat on the carrier according to the instructions of the manufacturer.
1. Children should be carried in specially adjusted and permanently installed on the bicycle baby seats, with the cyclist ensuring cover against springs potentially present
in the seat, in order to prevent the child from having their fingers crushed by the springs.