19
EN
Fig. 64. Installation of adjusting washer
Installation of the rear wheel with multigear axle Shimano Nexus 3 speed
During wheel installation/removal problems with correct switch operation may occur. In this case, contact an authorised service in
order to perform appropriate adjustments.
1. Install the adjusting washer, Fig. 64.
2. Tighten nuts, Fig. 65.
3. Install the pushing bolt, Fig. 66.
4. Install the body of gear change system, Fig. 67.
5. Tighten the brake, Fig. 68.
After wheel installation/removal, problems with proper switch operation may occur.
Contact the authorised service station in order to perform adjustment.
1. Latch the line in the handle, Fig. 69.
2. Install adjusting washers, Fig. 70.
3. Tighten the nuts, Fig. 71.
4. Tighten the brake, Fig. 72.
Installation of a rear wheel with a multi-gear axle Shimano Nexus 7/8 speed
Fig. 65. Nut tightening
Fig. 66. Pushing bolt installations
Fig. 67. Body installation
Fig. 68. Brake tightening
Fig. 69. Link latching
Fig. 70. Installation of adjusting washers
Fig. 72. Brake tightening
Fig. 71. Nut tightening
