manualshive.com logo in svg

Krone Vendro 680, Operating Instructions Manual, Page: 85 / 104

Share
Download
Krone Vendro 680 Operating Instructions Manual Download Page 85

Maintenance – Gearbox

13

Rotor gearbox

13.1

Vendro 680

Original operating instructions 150001223_01_en

85

13

Maintenance – Gearbox

 WARNING

Risk of injury due to non-observance of relevant safety notices

If the relevant safety notices are not observed, persons may get seriously injured or killed.

„

To avoid accidents, the basic safety instructions must be read and observed, 

see

Page 12

.

 WARNING

Risk of injury due to non-observance of safety instructions

If the relevant safety routines are not observed, persons may be seriously injured or killed.

„

The safety routines must be read and observed to avoid accidents, 

see Page 24

.

13.1

Rotor gearbox

The rotor gearboxes are maintenance-free.

13.2

Main gearbox

KW000-058

„

Comply with the safety routine "Safe execution of oil level check, oil and filter element
exchange", 

see Page 25

.

INFO

Check the oil level and change the oil in working position on horizontal, flat ground, with the
machine parked on both support jacks.

Check oil level

„

Unscrew the locking screw of the inspection hole (1).

ð

If the oil reaches up to the inspection hole (1):

„

Screw the locking screw into the inspection hole (1), tightening torque 

see Page 79

.

ð

If the oil does not reach up to the inspection hole (1):

„

Refill with fresh oil up to the inspection hole (1) via the inspection hole (1).

„

Screw the locking screw into the inspection hole (1), tightening torque 

see Page 79

.

Summary of Contents for Vendro 680









































































































Reviews:

No comments