Krone Vendro 680, Operating Instructions Manual, Page: 76 / 104

11 Maintenance – General
11.2 Tightening torques
76
Vendro 680
Original operating instructions 150001223_01_en
Components
Touch up damaged paint and preserve un-
coated areas with rust protection agent
Check that all moveable components move
freely. If required, dismount, clean, grease and
remount.
Park the machine in a weatherproof and dry
location which is not in close proximity to cor-
rosive substances
Protect the tyres against external influences
such as oil, grease or direct sunlight
Move the machine every 2 months
11.1.3 Maintenance – once after 10 hours
Components
Check tyre pressure see Page 81
Retightening wheel nuts see Page 81
Tighten screws/nuts on the machine see Page 76
Check screws on the tines see Page 79
11.1.4 Maintenance – every 50 hours
Components
Check tyre pressure see Page 81
Retightening wheel nuts see Page 81
Tighten screws/nuts on the machine see Page 76
Check screws on the tines see Page 79
11.1.5 Maintenance – Every 1000 hours
Changing oil
Main gearbox see Page 85
11.2 Tightening torques
Deviating tightening torques
All screw connections must in general be tightened with the listed tightening torques following.
Deviations from the tables are marked accordingly.
Metric thread screws with control thread
INFO
The table does not apply to countersunk screws with hexagon socket in case the countersunk
screw is tightened via hexagon socket.