manualshive.com logo in svg

Krone Vendro 680, Operating Instructions Manual, Page: 35 / 104

Share
Download
Krone Vendro 680 Operating Instructions Manual Download Page 35

Machine description

3

Road travel lighting

3.4

Vendro 680

Original operating instructions 150001223_01_en

35

3.4

Road travel lighting

INFO

When travelling on public highways, the machine must be fitted with the "Road travel lighting"
accessories kit 

see Page 18

.

For the version with "Road travel lighting"

2

1

KWG000-027

To comply with the national traffic regulations, the machine is equipped:

•

with white lights (1) at the front.

•

with three-chamber lamps (2) (flashing light, rear light and brake light) at the rear.

3.5

Overload protection

NOTICE

Machine damage due to load peaks

The overload protections protect the tractor and the machine from load peaks. For this
reason, overload protections must not be modified. The warranty for the machine becomes
void if other than the factory-specified overload protections are used.

„

Only use the overload protections installed in the machine.

„

To avoid early wear of the overload protection, switch the PTO shaft off if the overload
protection responds for a longer period of time.

„

Shut down and safeguard the machine, 

see Page 24

.

„

Remedy the malfunction, 

see Page 91

.

RM

KWG000-017

Summary of Contents for Vendro 680









































































































Reviews:

No comments