Krone Vendro 680 Operating Instructions Manual Download Page 68

Page: 68 / 104

Driving and transport

9.4

Preparing the machine for shipment

Vendro 680

Original operating instructions 150001223_01_en

Three-point hitch suspension point
at front

Bar suspension point

Disconnect the machine from the tractor,

see Page 66

Ensure that the hoist is mounted correctly on the anchor points.

Use a hoist with a minimum lifting capacity (depending on the approved total weight of the
machine), see machine rating plate,

see Page 33

9.4.2

Lashing the machine

WARNING

Danger to life caused by uncontrolled machine movement

If the machine is not properly lashed for transportation by vehicle, the machine may move in
an uncontrolled manner and endanger people.

Before transporting the machine, secure it properly to the designated lashing points using
suitable lashing material.

KWG000-022

Three-point hitch lashing point

Bar lashing point

Summary of Contents for Vendro 680









































































































Search results

Summary of Contents for Vendro 680

Reviews:

Krone Vendro 680, Operating Instructions Manual, Page: 68 / 104

Search results

Summary of Contents for Vendro 680

Reviews: