
Safety
2
Basic safety instructions
2.4
Vendro 680
Original operating instructions 150001223_01_en
17
Danger zone due to trailing machine parts
If machine parts are trailing, people may be seriously injured or killed.
After the drives have been switched off, the following machine parts will trail:
•
Universal shaft
•
Rotor
Shut down and safeguard the machine,
.
Do not attempt to approach the machine until all moving machine parts have come to a
standstill.
2.4.11
Ensuring functionality of safety devices
If safety devices are missing or damaged, people may be seriously injured or killed by moving
machine parts.
Replace damaged safety devices.
Mount dismounted safety devices and machine parts again before start-up and move them
to protective position.
If it is doubtful whether all safety devices have been correctly installed and are functional,
have a service centre check them.
Keeping universal shaft guard functional
The overlap of universal shaft and protective cap on the machine must not be less than 50 mm.
This minimum overlap is also required for protective devices of wide-angle universal shaft and if
couplings or other components are used. If the operator has to reach between the universal
shaft guard and the protective cap to connect the universal shaft, the clearance on one level
must be at least 50 mm. On all levels the clearance must be no more than 150 mm.
2.4.12
Personal protective equipment
The wearing of personal protective equipment is an important safety measure. Missing or
unsuitable personal protective equipment increases health risks and injuries.
Personal protective equipment includes, for example:
•
Suitable protective gloves
•
Safety shoes
•
Tight-fitting protective clothing
•
Hearing protection
•
Protective goggles
•
If dust is generated: appropriate breathing protection
Specify and provide personal protective equipment for the particular job.
Use only personal protective equipment which is in proper condition and offers effective
protection.
Adjust personal protective equipment to the person, for example the size.
Remove unsuitable clothing and jewellery (e.g. rings, necklaces) and cover long hair with a
hairnet.