16
Hitching the Titan to the tractor
1.
When the wagon is attached the distance between top
edge of frame and ground must be 1.10 m. During
operation adjustments can be carried out as follows:
support wagon on support wheel so that pressure is
relieved from cylinder.
1.1 Release nut (1), screw out bolt (2), turn threaded
spindle with wrench (jaw size 32), screw bolt (2) back
in and counter with nut (1).
1.2 If required use the additional bore (3) in the drawbar
member.
1.3 For a drawbar without hydraulic cylinder release nut
(1), screw out bolt (2). Use ø 8 mm mandril to turn turn
buckle (4). Screw bolt (2) back in and counter nut (1).
2.
Always attach slip clutch at machine side. Adjust
length of universal drive shaft to suit the tractor used.
Even with angled universal drive shaft (hydraulic
articulated drawbar) the minimum overlap of 14 cm
must be maintained.
ca. 50 mm
max. 1,10 m
