Portable spectrum analyzer Arinst SSA-TG R2 6 April 2019
www.arinst.net | www.arinst.ru | www.kroks.ru
9
Device
- in this menu, the device shutdown timer, amplitude and frequency shift are set, the serial
number of the device, its version and the settings for connecting the device via Bluetooth are specified.
Presets
- menu to save custom presets.
7.2.3. To exit the main menu, press (14)
«MENU»
.
7.3. Setting the frequency range of the analyzed signal
7.3.1. To set the frequency range, enter the main menu of the instrument (Figure 6) by pressing (14)
«MENU»
. Select subsection
«
Frequency
»
. The menu appears on the screen, as in figure 7.
Note. For quick access to the menu, press and hold the button (12) for about 2 seconds
«FREQ»
.
igure 7 Menu of setting the frequency of the overview
7.3.2. Each of the options of the submenu has its own purpose:
Center
– setting the center frequency of the frequency range of the overview of the analyzed signal.
Span
– setting the frequency range.
Start
– setting the initial frequency of the measured frequency range.
Stop
- setting the final frequency of the measured frequency range.
7.3.3. Each of the parameters is set by entering a numerical value in the opened submenu, as in Fig-
ure 8. Enter the numeric value of the frequencies and press
Enter
. To delete erroneous or previously en-
tered values, press
Del
. To refuse to enter a value, press
Cancel
.
In our example, in Figure 8, setting the
frequency range of the survey is 352.36 MHz wide.
igure 8 Entering numeric values.
