Portable spectrum analyzer Arinst SSA-TG R2 6 April 2019
www.arinst.net | www.arinst.ru | www.kroks.ru
6
4.2.10. Do not allow children to play with the device, as they
can
hurt or injure others, or damage the
device.
4.2.11. Use chargers, cords, adapters and other accessories recommended by the manufacturer.
4.2.12. When connecting to the device other devices, carefully read their purpose, technical character-
istics and safety rules in their manuals. Do not connect incompatible devices.
4.2.13. Maintenance and repair of the instrument must be carried out only by the manufacturer or an
authorized service center.
5. STRUCTURE OF THE DEVICE
5.1. The spectrum analyzer device is shown in figure 2.
Figure 2
– Appearance of the device
1. The output of the signal generator
TG OUT
6. Indicator of the mode of operation of the device
2. Antenna input
RF IN
MODE
3. Housing
7. Battery charging indicator
CHARGE
4. Color resistive screen 3,
2’’
8. Connector mini-USB
5. Button on / off
POWER
9. Control button block
5.2. The control button unit is shown in figure 3.
Figure 3
– The block of control buttons
10.
«SPAN»
(overview frequency range) - buttons " - "
and " + " change the frequency range of the analyzed
signal.
11. Buttons to move the screen scale grid and change
the frequency.
12.
«FREQ»
-
displays the frequency parameters on the
screen. Long press (more than 2 seconds) to open the
menu for setting the viewing frequency range.
13.
«MKR»
setting markers. Long (more than 2 seconds)
button holding opens the menu of markers and peak val-
ues of the analyzed signal.
14.
«MENU»
- the button opens the main menu of the
device.
15.
«AMPL»
- output amplitude parameters on the
screen. Long (more than 2 seconds) holding the button
opens the menu for setting the amplitude parameters.
