Portable spectrum analyzer Arinst SSA-TG R2 6 April 2019
www.arinst.net | www.arinst.ru | www.kroks.ru
74
4.7. Clicking on the name of the spectrum analyzer connected to the application (
in our example it is
ARINST_SSA_UNV_3997
) close the
Devices
window. The device will connect to the PC via Bluetooth
data transfer protocol. The graph of the test signal will appear on the PC monitor in the Arinst SSA appli-
cation (Figure A15), the screen (4) of the spectrum analyzer to save battery power will turn off. The inter-
face of the spectrum analyzer control program is similar to the interface described in Section 8 of this Op-
eration Manual.
Figure A15 - Spectrum Analyzer connected to PC via Bluetooth wireless connection
4.8. To disconnect the spectrum analyzer from the PC, in the Arinst SSA application window, click on
the Bluetooth connection symbol located in the upper right corner. In the
Devices
window that appears,
click on the name of your device. Close the
Devices
window. The spectrum analyzer will be disconnected
from the PC and its screen (4) will turn on.
4.9. When finished, turn off the spectrum analyzer by pressing the button (5)
POWER
. Turn off Blue-
tooth on your PC.
