Portable spectrum analyzer Arinst SSA-TG R2 6 April 2019
www.arinst.net | www.arinst.ru | www.kroks.ru
5
3. COMPLETENESS
3.1. The delivery set of the device is presented in table 2 and in figure 1.
Table 2
Figure 1
– Completeness
Name
Amount
Spectrum analyzer ARINST SSA-TG R2
1 pc.
Adapter SMA(male)-SMA(female)
2 pc.
Power cable mini-USB on USB 2.0 with
data transfer
1 pc.
Operation manual (passport)
1 pc.
Packaging
1 pc.
In connection with constant improvement of design and software, the manufacturer reserves
the right to make changes in the scheme, technical characteristics and completeness of this de-
vice.
4. SAFETY RULES FOR OPERATING THE DEVICE
4.1. General safety requirements
4.1.1. To work with the instrument allowed persons familiar with the present "User Manual" and been
briefed on rules for safe work with electrical appliances.
4.1.2. The risk of injury is possible when the charger is plugged in or unplugged. Use serviceable
sockets and chargers.
4.1.3. In order to avoid damage to the wires and connectors of the device, it is prohibited to hang any-
thing on the wires, paint over and glue the wires and connectors, disconnect the wires from the cord.
4.1.4. It is strictly forbidden to persons using the device: transfer the device to strangers, disassemble
and repair any device not agreed with the manufacturer, use the device with a damaged case.
4.1.5. If a fault is detected, stop operation immediately and turn off the instrument.
4.1.6. If you need to leave the workplace, turn off the device and other devices. Do not leave the de-
vice running unattended!
4.1.7. Do not use the device in hospitals. The use of the device near medical equipment is allowed on-
ly with the consent of the medical staff.
4.2. Additional security requirements
4.2.1. Use the device only for its intended purpose. Familiarize yourself with the purpose, device and
technical characteristics of the device.
4.2.2. Keep the balance and steady posture while working with the device. Move slowly, do not run.
4.2.3. Avoid working in open spaces during snow or rain. Increased humidity and all types of liquid,
once inside the device, can damage it.
4.2.4. Do not expose the device to very low or very high temperatures; exposure to extreme tempera-
tures may damage the internal battery.
4.2.5. Do not use the appliance in a corrosive or explosive environment. Aggressive vapors can de-
stroy the insulation, which can lead to failure of the device.
4.2.6. Do not carry the device by the cables and wires connected to it, do not unplug the connectors by
pulling the cable or cord.
4.2.7. Do not apply excessive force to the control buttons and the instrument screen.
4.2.8. Avoid dropping or otherwise shocking the unit. The device may be damaged if dropped.
4.2.9. Do not disassemble or modify the appliance without the approval of the manufacturer or outside
of the procedures described in this manual. Incorrect self-intervention will result in loss of warranty.
