Portable spectrum analyzer Arinst SSA-TG R2 6 April 2019
www.arinst.net | www.arinst.ru | www.kroks.ru
63
Figure 93
Battery replacement
10.3.8. Apply a new double sided tape and attach a new battery (20) securely to it. Connect the battery
connector (19) to the connector on the board. Reassemble the instrument in reverse order.
10.3.9. After assembling the device, charge the battery according to paragraph 10.2. of
this «Manual»
10.4. Storage and transportation
10.4.1. Store the appliance in a dry place at a positive temperature and relative humidity not exceeding
75%.
10.4.2. Before storing the appliance, charge the battery.
10.4.3. If stored for a long time, recharge the battery every 3 months. The ambient temperature at
which the instrument is stored can have a significant effect on the self-discharge rate of the battery.
10.4.4. Keep the device and its accessories out of the reach of children.
10.4.5. When transporting the device must be securely fastened. Shaking, knocking and dropping can
cause the device to fail.
10.5. The criterion of the limit state
10.5.1. The criterion of the limiting state of the device is a sign, or a set of signs, upon reaching which:
- further operation of the device is not allowed;
- recovery to a healthy state is impossible or economically impractical.
10.5.2. Upon reaching the limit state, the device must be decommissioned and disposed of.
10.6. Utilization
10.6.1. The device, battery, cords and cables that have failed, should be transferred to special collec-
tion points for the disposal of electronic devices. Do not throw away broken appliances, batteries, cables
into household waste!
