Portable spectrum analyzer Arinst SSA-TG R2 6 April 2019
www.arinst.net | www.arinst.ru | www.kroks.ru
13
igure 13 Switching on the internal signal generator
7.6.2.
To turn on the internal output generator, move the “slider” across the screen to the right.
On the screen will open the window for setting the frequency of the
Generator Frequency
and the
power of the
Generator Power
of the generator output signal, as in Figure 14.
igure 14 Setting the frequency and power output of the generator
7.6.3. Setting the frequency of the output signal of the internal generator,
Generator Frequency
, is
done by entering a numeric value in the opened submenu, as in Figure 11. Enter a numeric value for the
generator output frequency, between 35 and 6200 MHz, and press
Enter
. To delete erroneous or previ-
ously entered values, press
Del
. To refuse to enter a value, click
Cancel
. In our example, in figure 15, the
output frequency of the generator is set to 1000 MHz.
