Kraun KR.XY, User Manual

Page: 72 / 257

72
Manual
www.kraun.it
This section describes the network configuration to be used and the process for configuring
Integrated Access Device as a WDS device.
Figure: Network diagram
In the above network diagram, AP-1 and AP-2 represent Integrated Access Device devices.
PC-1 and PC-2 are WLAN enabled PCs. The dotted line in the above figure represents
association, i.e., PC-1 is associated with AP-1 and PC-2 is associated with AP-2. AP-1 and AP-2
are in the radio range of each other.
The broad/bold lines on APs represent wireless antenna.
Configuring Integrated Access Device AP-1
Configure wireless interface towards the wireless clients associated to this AP, as follows:
From the left-hand 1. System menu, click on Configuration -> Wireless Network . The following
page is displayed:
From the
2.
Channel Selection
drop-down list, select
Manual
.
AP-1 and AP-2 must use a common wireless channel, or else WDS communication between 3.
them will not work. Therefore, configure AP-1 to use wireless channel number 7 (select any
valid wireless channel)
From the
4. Select Channel drop-down list, select 7 .
From the Select Security Option drop-down list, select Off - No Encryption. 5.