Kraun KR.XY User Manual Download Page 222

Page: 222 / 257

222

Manual

www.kraun.it

Firmware Update

The

Firmware Update

page allows you to:

check if an updated firmware version is available from [Provider].

•

download an updated firmware version and install it on your device.

•

manually download the latest firmware version from [Provider]’s website and manually update

•

your firmware. See

Manually updating firmware

About firmware versions

Firmware is a software program. It is stored as read-only memory on your device. [Provider] is

continually improving this firmware by adding new features to it, and these features are saved in

later versions of the firmware.

Your device can check whether there are later firmware versions available. If there is a later

version, you can download it via the Internet and install it on your device.

Note

If there is a firmware update available you are strongly advised to

install it on your device to ensure that you take full advantage of

any new feature developments.

Manually updating firmware

You can manually download the latest firmware version from [Provider]’s website to your PC’s

file directory.

Once you have downloaded the latest firmware version to your PC, you can manually select and

install it as follows:

From the left-hand

Admin

menu, click on

Firmware Upgrade

. The following page is

displayed:

Summary of Contents for KR.XY


































































































































































































































































Search results

Summary of Contents for KR.XY

Reviews:

Related manuals for KR.XY

Brands by name

Popular brands

Kraun KR.XY, User Manual

Search results

Summary of Contents for KR.XY

Reviews:

Related manuals for KR.XY

Brands by name

Popular brands